ATMEGA1608-MUR

Images are for reference only

ATMEGA1608-MUR

IC MCU 8BIT 16KB FLASH 32VQFN

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Supplier Microchip Technology
Package Tape & Reel (TR),Cut Tape (CT)
Series megaAVR® 0, Functional Safety (FuSa)
ProductStatus Active
CoreProcessor AVR
CoreSize 8-Bit
Speed 20MHz
Connectivity I²C, SPI, UART/USART
Peripherals Brown-out Detect/Reset, POR, PWM, WDT
NumberofI/O 27
ProgramMemorySize 16KB (16K x 8)
ProgramMemoryType FLASH
EEPROMSize 256 x 8
RAMSize 2K x 8
Voltage-Supply(Vcc/Vdd) 1.8V ~ 5.5V
DataConverters A/D 12x10b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 32-VFQFN Exposed Pad

Overview

Description

Introduction to ATMEGA1608-MUR
- It is an 8‑bit AVR microcontroller from Atmel/Microchip, part of the megaAVR family designed for small embedded control tasks. It uses the AVR RISC core with flash for program memory, RAM for data, and EEPROM for nonvolatile storage.
- Peripherals: I/O ports, multiple timers and PWM outputs, ADC, USART/UART, SPI, I2C/TWI, analog comparator, watchdog timer, Brown‑out detect, and various sleep modes for low power.
- Power and performance: operates from a single supply (low voltage range) and can run at up to tens of MHz in normal mode with flexible clock options.
- Programming and toolchain: supports UPDI or SPI programming depending on package; supported by Microchip Studio/Atmel Studio and the avr-gcc toolchain.
- Typical use: hobbyist projects, sensors, motor control, and small embedded systems requiring moderate peripherals and low power.
- Getting started: read the datasheet, install Microchip Studio, write code in C or assembly, compile with avr-gcc, and program with a suitable programmer.

Features

ATmega1608-MUR features (concise):
- 8-bit AVR core, up to 20 MHz operation
- Operating voltage: 1.8–5.5 V (wide voltage range for battery/sensor apps)
- Memory: Flash program memory, SRAM, and EEPROM (sizes per datasheet)
- Peripherals: USART/UART, SPI, and I2C/TWI
- Timers: multiple timers (at least two 8-bit with PWM and one 16-bit timer/counter)
- Analog: 10-bit ADC and analog comparator
- Interrupts: extensive interrupt system with multiple external and peripheral sources
- Power management: several sleep modes, watchdog timer, Brown-out detector
- Programming/debug: In-System Programming (ISP) and bootloader support; fuse/lock bits
- I/O: plenty of GPIOs with Pin Change capabilities
- Package: MUR variant (compact package suitable for space-constrained designs)
Note: exact memory sizes, available peripherals, and I/O counts are specified in the official datasheet for the specific device revision.

Package

The ATMEGA1608-MUR comes in a 32‑pin MLF (QFN) package (about 5x5 mm), RoHS compliant.

Pinout

- Pin count: 32 pins (MUR package, e.g., QFN/MQFP 32-pin)
- Function: 8-bit AVR microcontroller (megaAVR family) for general-purpose embedded control; provides GPIO, timers, ADC, and serial interfaces (USART/SPI/I2C).

Manufacturer

Manufacturer: Microchip Technology Inc.
Microchip is an American multinational semiconductor company that designs, develops, manufactures, and sells microcontrollers, analog ICs, memory, and other embedded semiconductor products. It acquired Atmel in 2016, bringing the AVR ATmega line (including the ATMEGA1608) under Microchip’s umbrella.

Application

Typical applications of ATmega1608-MUR:
- Small embedded control tasks in consumer electronics and appliances
- IoT and sensor nodes, home automation controllers
- LED lighting controllers and dimmers
- Motor control for small DC motors
- Data acquisition and logging, battery-powered devices, simple user interfaces (keypad/displays), hobbyist/educational projects

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer