DG412DQ-T1-E3

Images are for reference only

DG412DQ-T1-E3

IC SWITCH QUAD SPST TSSOP16

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Supplier Vishay Siliconix
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchCircuit SPST - NO
Multiplexer/DemultiplexerCircuit 1:1
NumberofCircuits 4
On-StateResistance(Max) 35Ohm
Voltage-SupplyDual(V±) ±15V
SwitchTime(TonToff)(Max) 175ns, 145ns
ChargeInjection 5pC
ChannelCapacitance(CS(off)CD(off)) 9pF, 9pF
Current-Leakage(IS(off))(Max) 250pA
Crosstalk -85dB @ 1MHz
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 16-TSSOP (0.173, 4.40mm Width)

Overview

Description

DG412DQ-T1-E3 is a dual analog-switch IC in the DG412 family. It contains two independent, bidirectional MOSFET switches that connect or isolate analog paths under control logic. When a switch is “on,” it presents a low on-resistance; when “off,” it provides high isolation and very low leakage. Typical uses include signal routing, multiplexing, and instrumentation in test, measurement, and data-acquisition systems.
Key points:
- Two switches per device (dual channel)
- Digital control inputs drive the on/off state
- Bidirectional signal path with low distortion potential
- Packaging/variants: -T1 (tape-and-reel) and -E3 (specific temperature/packaging variant); -DQ indicates the dual-device configuration
For exact electrical specs (on-resistance, leakage, supply voltage range, switching speed, recommended operating conditions), and the precise packaging details, consult the manufacturer’s datasheet and the distributor’s ordering guide.

Features

DG412DQ-T1-E3 is a dual bilateral CMOS analog switch (DG412 family) in an 8-pin package. Typical features include:
- Two independent SPST bilateral switches
- Wide supply range: supports single or dual supplies (3–18 V common range)
- On-resistance: tens of ohms (RON, typical) with good channel-to-channel matching
- Low leakage in the off state (pA–nA range)
- Break-before-make operation
- Low charge injection and fast switching
- Small signal capacitance (C(on), C(off)) for minimal loading
- Low quiescent current; suitable for low-power applications
- ESD protection rated for handling common electrostatic events
- Temperature range suitable for extended operation (E3 grade)
- RoHS-compliant 8-pin package (T1 variant)
Note: exact electrical specs (RON, leakage, switching speed, temperature range) vary by lot and package revision. For precise numbers, please consult the latest DG412DQ-T1-E3 datasheet.

Package

A 16‑pin small‑outline IC package (SOIC). Pb‑free, Tape & Reel (T1) packaging.

Pinout

- Pin count: 8 pins (SOIC-8, DQ package)
- Function: Dual bilateral CMOS analogue switches (two independent transmission-gate/analog switch paths) controlled by enable/select inputs to connect or disconnect two analog signal paths.

Manufacturer

- Manufacturer: Vishay Intertechnology, Inc.
- What kind of company: A global electronics components company that designs and manufactures semiconductors (including analog switches) and passive components (resistors, capacitors, inductors), serving automotive, industrial, computing, consumer, and communications markets.

Application

Applications for DG412DQ-T1-E3 include:
- Analog signal routing and multiplexing in instrumentation and data acquisition
- Programmable attenuation and gain control
- Audio/video switching in consumer electronics
- Sensor interfaces and automotive/industrial signal paths
- Test and measurement equipment and signal conditioning
Note: for exact topology, voltage ranges, and pinout, consult the DG412 datasheet.

Equivalent

DG412DQ-T1-E3 is a Vishay Siliconix DG412 quad CMOS analog switch. Closest cross-reference by function: Analog Devices ADG412. For exact equivalents, check distributor cross-references (Digi-Key/Mouser) using the full part number; specify your required supply voltage and channel configuration to get precise matches.

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar