EPM7256AETC100-10

Images are for reference only

EPM7256AETC100-10

IC CPLD 256MC 10NS 100TQFP

  • Manufacturer
  • Mfr. Part #EPM7256AETC100-10
  • Package 100-TQFP
  • Datasheet
  • In Stock2442

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Supplier Intel
Package Tray
Series MAX® 7000A
ProductStatus Obsolete
ProgrammableType In System Programmable
DelayTimetpd(1)Max 10 ns
VoltageSupply-Internal 3V ~ 3.6V
NumberofLogicElements/Blocks 16
NumberofMacrocells 256
NumberofGates 5000
NumberofI/O 84
OperatingTemperature 0°C ~ 70°C (TA)
MountingType Surface Mount
Package/Case 100-TQFP

Overview

Description

Introduction to EPM7256AETC100-10:
- Type: Altera/Intel EPLD (EPM7256A family), a small, reprogrammable logic device.
- Key specs: 256 macrocells, 100-pin TQFP package (ETC), 3.3V operation, speed grade -10 (slower end of the range).
- Purpose: implement glue logic, simple state machines, decoders, counters, and interface logic between components.
- Programming: configured with Altera/Intel tools (Quartus II or older MAX+PLUS II) using programmers such as ByteBlaster or USB-Blaster; in-system/in-circuit programming may be supported via JTAG/AS interfaces on board.
- Notes: older/legacy device family; tool support and availability may be limited compared to modern devices. Suitable for retro designs or educational projects needing small, custom logic.

Features

Here are the main features of the EPM7256AETC100-10 (MAX II CPLD):
- High-density CPLD in 100-pin TQFP package, part number EPM7256AETC100-10
- 256 macrocell-based logic fabric for flexible, low-cost digital design
- On-chip non-volatile configuration memory (FPROM) for in-system reconfigurability; supports serial configuration (FPS/Active Serial) with no external config memory needed
- Flexible I/O banks capable of supporting standard CPLD I/O levels (typical 3.3V and 2.5V signaling; some pins 5V-tolerant depending on bank)
- JTAG boundary-scan for programming and debugging
- In-system programmable and reconfigurable design flow using standard tools (Quartus II/Intel design software)
- Low power consumption and small form factor suitable for space- and cost-constrained designs
- General-purpose registers, combinational logic, simple state machines, and routing resources for rapid prototyping
Note: Exact I/O counts per bank and voltage/tolerance specifics depend on the device’s bank configuration; consult the datasheet for precise electrical characteristics.

Package

It uses a 100-pin TQFP (Thin Quad Flat Pack) package.

Pinout

- Pin count: 100 pins (TQFP-100)
- Function: Altera MAX 7000A family 256-macrocell EPLD/CPLD device for implementing general digital logic (glue logic, etc.).

Manufacturer

- Manufacturer: Altera Corporation (now part of Intel Corporation).
- Company type: Semiconductor company specializing in programmable logic devices (PLDs), including EPLDs/CPLDs and FPGAs.

Application

Typical applications for the EPM7256AETC100-10 CPLD include:
- Glue logic for microprocessors/ASICs (address decoding, bus interfacing)
- Simple state machines and control logic
- I/O expansion and peripheral interfaces (LEDs, displays, GPIO)
- Timing utilities: counters, timers, PWM
- Clock-domain crossing and timing alignment
- Prototyping, development boards, and educational projects

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer