FODM217A

Images are for reference only

FODM217A

OPTOISO 3.75KV 1CH TRANS 4-SOP

  • Manufacturer
  • Mfr. Part #FODM217A
  • Package
  • Datasheet
  • In Stock27543

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Series FODM217
Part Status Active
Base Product Number FODM217
Number of Channels 1
Voltage - Isolation 3750Vrms
Current Transfer Ratio (Min) 80% @ 5mA
Current Transfer Ratio (Max) 160% @ 5mA
Turn On / Turn Off Time (Typ) 3µs, 3µs
Rise / Fall Time (Typ) 2µs, 3µs
Input Type DC
Output Type Transistor
Voltage - Output (Max) 80V
Current - Output / Channel 50mA
Voltage - Forward (Vf) (Typ) 1.2V
Current - DC Forward (If) (Max) 50 mA
Vce Saturation (Max) 400mV
Operating Temperature -55°C ~ 110°C
Mounting Type Surface Mount
Package 4-SOIC (0.173", 4.40mm Width)
Supplier Device Package 4-SOP
Packaging Tube

Overview

Description

FODM217A is a photomos/optical isolator (photocoupler) used to provide galvanic isolation between input and output. It typically contains an infrared LED on the input side and MOSFET output on the other side, so driving the LED turns the output MOSFETs on and completes a load circuit without a direct electrical connection.
Key points:
- Single-channel, solid-state relay style device
- LED input drives a MOSFET output for isolated switching
- No mechanical contacts, good for long life and high-frequency switching
- Suitable for switching AC/DC loads depending on the output configuration
- Commonly used for isolated signal interfaces, microcontroller protection, measurement equipment, and power-supply control
For exact electrical specs (IF, VDS, RON, leakage, isolation voltage, switching times, and package type), refer to the datasheet for the specific FODM217A revision.

Package

FODM217A uses an 8-pin package: DIP-8 (through-hole). It is also available in an 8-pin SO-8 surface-mount version.

Pinout

FODM217A is an 8-pin device (DIP-8/SO-8) and is a 1-channel optocoupler with a MOSFET output. The input is an LED; the output is two MOSFETs connected back-to-back to provide isolated, bidirectional switching suitable for solid-state relay-style applications.

Manufacturer

Manufacturer: Fairchild Semiconductor (now part of ON Semiconductor).
What kind of company: A global semiconductor company that designs, manufactures, and markets integrated circuits, discrete semiconductors, and optoelectronic devices.

Application

FODM217A is a dual MOSFET optocoupler (Photomos) for galvanic isolation with load switching. Typical applications:
- Isolated switching of DC/low-voltage AC loads (relay replacement)
- Gate-drive isolation for power MOSFETs/IGBTs
- Isolated signal interfaces in industrial automation and instrumentation
- Power supplies and telecom equipment needing control/load-side isolation
- Safety-critical medical devices and consumer electronics requiring galvanic isolation

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar