INA199B3DCKR

Images are for reference only

INA199B3DCKR

IC OPAMP CURR SENSE 14KHZ SC70-6

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Package Tape & Reel (TR),Cut Tape (CT)
Series Zero-Drift
ProductStatus Active
Function Current Sense
SensingMethod High/Low-Side
Accuracy ±1.5%
Voltage-Input -0.1V ~ 26V
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 6-TSSOP, SC-88, SOT-363

Overview

Description

INA199B3DCKR is Texas Instruments’ high-side current-sense monitor in an 8-pin VSSOP (DCK) package with Tape & Reel. It measures the voltage across a shunt resistor in the load’s high side and outputs an analog voltage proportional to the load current, serving as a front end for current sensing.
Key points:
- High-side sensing: common-mode up to about 40 V; VCC typically 2.7–5.5 V.
- Output proportional to shunt voltage with a fixed gain; REF pin allows zero-offset adjustment.
- No external ADC required for basic sensing; easy to feed to an ADC or comparator.
- Designed for automotive/industrial use with good precision and fast response.
- Package: 8-pin VSSOP (DCK), RoHS, Tape & Reel.
Typical usage: connect SH+ and SH− across a sense resistor, supply VCC to a logic rail, ground to GND, read VOUT (and adjust with REF if needed). For exact specs and ordering, consult the TI INA199 datasheet.

Features

Concise features of INA199B3DCKR:
- High-side current-sense monitor with current-output architecture
- Wide input/common-mode range: up to about 0–26 V (sensing across a shunt on the high side)
- Differential sense voltage across shunt: typically ±100 mV range
- Supply voltage (Vcc): 2.7 V to 5.5 V (single-supply operation)
- Output: Iout current output; external resistor converts to voltage; Vref pin available for offset/zero set
- Fast response with low offset and good accuracy over temperature
- Wide operating temperature: -40°C to +125°C
- 8-pin package (DCK/RoHS compliant, VSSOP family)
- Suitable for rugged automotive/industrial sensing with simple Iout-to-V conversion
Note: For exact electrical specs (gain, Iout range, input offset, protection features), please consult the TI datasheet for INA199B3DCKR.

Package

The INA199B3DCKR is in an 8-pin DCK package, i.e., VSSOP-8 (Very Small Outline Package) with tape-and-reel.

Pinout

- Pin count: 8 pins (8-pin package, DCKR).
- Function: High-side current-sense amplifier with a current-output (Iout). It senses the voltage across an external shunt resistor (IN+ to IN−) and outputs a current proportional to that differential voltage, with REF for offset. Used for bidirectional current monitoring in the power path.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- Company type: American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits; headquartered in Dallas, Texas, and one of the world's largest semiconductor producers.

Application

Typical application areas for INA199B3DCKR:
- High-side current sensing for power supplies and DC-DC converters
- Battery-management and protection in portable and automotive systems
- Overcurrent protection and fault detection in motor drivers and power stages
- Load-current monitoring for regulation and efficiency
- Power-management ICs in automotive, telecom, servers, and consumer electronics

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar