Images are for reference only
LM1117
- Manufacturer
- Mfr. Part #LM1117
- Package
- Datasheet
- In Stock6609
100% Original & New
24 Hours ready to ship
365 Days Warranty
RFQ & Get more Discounts
Specifications
| Brand | onsemi |
Overview
Description
Key points:
- Input up to ~15V; output current up to ~1 A with proper heatsinking.
- Dropout around 1.1–1.3 V at moderate load (higher if loaded hard).
- Efficiency is low (linear regulator), dissipating (Vin − Vout) × I as heat; thermal management matters.
- Requires input and output capacitors for stability (typ. 10 µF on each; low-ESR types recommended).
- Pinout (TO-220/SOT-223) commonly Adj/GND, Vout, Vin; check the datasheet for exact package.
- Common uses: simple 5V/3.3V rails for microcontrollers, hobby projects, or as an adjustable regulator in small power supplies.
Note: Always verify exact pinout and capacitor ESR requirements from the datasheet for your package variant.
Features
- Low dropout regulator: dropout about 1.2 V at 1 A.
- Output current: up to 1 A.
- Fixed and adjustable versions: fixed outputs (e.g., 3.3 V, 5 V, 12 V) and LM1117-ADJ for adjustable output.
- External resistors needed for adjust version.
- Input voltage range: up to ~15 V (max varies by variant); suitable for low-voltage rails.
- Quiescent current: typically a few milliamps.
- Good regulation: decent line and load regulation; accuracy around a couple percent.
- Protection: current limiting, thermal/shutdown protection, short-circuit protection.
- Package options: TO-220 and SOT-223 (surface-mount) widely used.
- Pinout (common): Vout, GND/Adj, Vin (pinout remains consistent across variants).
Package
Pinout
Pinout (view from the front, pins down):
- Pin 1: Ground (fixed versions) or Adjust (ADJ) (adjustable variant)
- Pin 2: Output
- Pin 3: Input
Note: For fixed LM1117 parts (e.g., 3.3V, 5V), pin1 is GND, pin2 is Vout, pin3 is Vin. For the LM1117-ADJ variant, pin1 is ADJ, with external resistors setting the output.
Manufacturer
Application
- Used as post- or pre-regulator in embedded systems, MCUs/SoCs, sensors, op-amps, ADC/DAC, and RF circuits.
- Adjustable version for custom output voltages; fixed versions (3.3 V, 5 V) are common.
- Suitable for battery-powered, consumer electronics, automotive and industrial equipment with proper input/output capacitors and thermal management.
Equivalent
- AMS1117 (Analog Devices)
- LD1117 / LD1117V33 (STMicroelectronics)
- NCP1117 (ON Semiconductor)
- TLV1117 (Texas Instruments)
These share the same pinout (GND/Output/Input) and ~1 A rating, in packages like TO-220 and SOT-223. They come in fixed outputs (3.3 V, 5 V, 1.8 V, etc.) and adjustable variants, so any 1117-series regulator with the same footprint can be a drop-in replacement.
Shipping
Shipping MethodsWe
offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.
Shipping Fee Reference (DHL/FedEx):
DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.
FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.
UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.
TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.
EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.
Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.
Payments
Payment Methods
The Payment term is 100% Prepaid.
Currently, we only accept the below payment methods:
1. PayPal
2. Credit/ Debit Card
3. Wire Transfer
Similar
-
MX25V1635FZNQ03
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V5126FM1I
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25V1635FM2I
Macronix
-
MX25U25645GXDI00
Macronix
-
MX29LV160DTTI-70G
Macronix
-
MX29F040CQI-70G
Macronix
-
MX25L25735FMI-10G
Macronix
-
MX30LF4G18AC-TI
Macronix