LM95235DIMM

Images are for reference only

LM95235DIMM

SERIAL SWITCH/DIGITAL SENSOR, 13

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Supplier Rochester Electronics, LLC
Package Bulk
ProductStatus Active
SensorType Digital, Local/Remote
SensingTemperature-Local -40°C ~ 90°C
SensingTemperature-Remote -40°C ~ 90°C
OutputType 2-Wire Serial, I²C/SMBUS
Voltage-Supply 3V ~ 3.6V
Resolution 10 b (Local), 13 b (Remote)
Features One-Shot, Output Switch, Programmable Limit, Shutdown Mode, Standby Mode
Accuracy-Highest(Lowest) ±2°C (±6°C)
TestCondition 25°C ~ 100°C (-40°C ~ 25°C)
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Overview

Description

The LM95235DIMM is a TI (formerly National) DIMM-temperature-monitoring IC. It provides digital temperature sensing for memory modules via an SMBus/I2C interface, so a system MCU/BMC can read DIMM temperatures and take action.
Key points:
- Two temperature-sensing channels with digital outputs
- Programmable high/low alarm thresholds and an alert/interrupt output
- SMBus/I2C slave interface with register-based access
- Designed for DIMMs in servers, workstations, and telecom equipment to help manage cooling and prevent thermal issues
In short, it’s a compact, DIMM-optimized temperature sensor/monitor to enable proactive thermal management on memory modules. For specifics (pinout, timing, register map), consult the LM95235DIMM datasheet.

Features

Here are the typical features of LM95235-DIMM (DIMM temperature monitor):
- I2C/SMBus-compatible digital temperature sensor for DIMMs
- On-board temperature monitoring with programmable alarm thresholds (hysteresis)
- Readable temperature data (high accuracy, typically 1°C steps; broad range)
- Alert/interrupt output to host/controller on over-temp or fault
- Small form-factor suitable for DIMMs; low-power operation
- Configurable I2C address and basic register set for reading status and temperatures
Note: exact sensor count, resolution, and voltage range may vary by revision; consult the current datasheet for precise specs.

Package

LM95235DIMM comes in an 8-pin surface-mount package, typically an SOIC-8 (SOP-8) package designed for DIMM modules.

Pinout

The LM95235DIMM is an 8‑pin device (8 pins). It is a digital temperature sensor/thermostat with an I²C/SMBus interface. Typical pin functions are:
- VCC (power)
- GND (ground)
- SDA (I²C data)
- SCL (I²C clock)
- ALERT/INT (open‑drain thermal alert/interrupt)
- One or two ADDR pins (I²C address selection)
- A thermal output/configuration pin or NC depending on package/options
For the exact pin-to-pin mapping and programmable alarm/monitor features, please consult the official TI datasheet for LM95235DIMM.

Manufacturer

Manufacturer: Texas Instruments (TI).
What kind of company: TI is an American semiconductor company that designs, manufactures and sells integrated circuits and semiconductor devices—primarily analog chips and embedded processors—for industrial, automotive, consumer and communications markets.

Application

Applications of LM95235DIMM:
- Servers and data-center systems (high-density DIMMs)
- Workstations and HPC clusters
- Telecom and network equipment using DIMMs
- Enterprise storage and blade systems
- Any SMBus/I2C DIMM temperature sensing with alert outputs

Equivalent

Possible equivalents (SMBus/I2C digital temp sensors used for DIMMs):
- Analog Devices: ADM1032 / ADM1033; ADT7420 / ADT7422
- TI/Totally TI family: LM75A / LM75B / TMP75
- Maxim: MAX6642 / MAX6643
- Microchip: MCP9808 / MCP9804
- STMicro: STLM75
Note: pinout, resolution, and features vary. Check datasheets for exact compatibility and interface.

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar