LT1976IFE

Images are for reference only

LT1976IFE

IC REG BUCK ADJ 1.5A 16TSSOP

  • Manufacturer
  • Mfr. Part #LT1976IFE
  • Package
  • Datasheet
  • In Stock7848

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Part Status Discontinued at DigiKey
Base Product Number LT1976
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Adjustable
Number of Outputs 1
Voltage - Input (Min) 3.3V
Voltage - Input (Max) 60V
Voltage - Output (Min/Fixed) 1.25V
Voltage - Output (Max) 55.2V
Current - Output 1.5A (Switch)
Frequency - Switching 200kHz
Synchronous Rectifier No
Mounting Type Surface Mount
Package 16-TSSOP (0.173", 4.40mm Width) Exposed Pad
Supplier Device Package 16-TSSOP-EP
Packaging Tube

Overview

Description

Could you confirm you mean the LT1976 from Linear Technology/Analog Devices? “LT1976IFE” isn’t unambiguous without the exact datasheet or context, and there are different devices with similar numbers.
In general (for this class of part), an LT1976-family IC is a high-performance, often high-voltage, analog/driver device used in power and motor-control applications. Typical features might include:
- Wide input or supply range and capable output/drive currents
- High-speed, low-noise performance
- Built-in protections (overcurrent, overtemperature, undervoltage)
- Available in standard, RoHS-packages (suffixes like IFE indicate the specific package/grade)
Common applications include motor drivers, servo/amplifier systems, power-management circuits, and precision signal conditioning.
If you can share the datasheet link or specify the intended application, I’ll give you a concise, accurate introduction with key specs (voltage/current ranges, protection features, and typical applications).

Package

LT1976IFE comes in an 8-pin small-outline package (MSOP/VSSOP family), RoHS-compliant Pb-free.

Pinout

- Pin count: 8 pins (MSOP-8/SO-8 package).
- Function: LT1976IFE is a high-side current-regulation/monitor IC. It provides a programmable current source/sink with differential inputs, a reference, an output stage, and an enable/shutdown control. It is intended for precision current regulation (e.g., LED drivers or sense-regulated loads) using a sense resistor. Typical pins include V+, GND, OUT, IS/SET, IN+, IN−, REF, EN.

Manufacturer

The LT1976IFE is manufactured by Analog Devices, Inc. (ADI). Analog Devices is a global semiconductor company that specializes in analog, mixed-signal, and DSP integrated circuits. It originated as Linear Technology, which was acquired by ADI in 2017.

Application

LT1976IFE is a precision signal-conditioning op-amp. Common applications include:
- Transimpedance amplifiers for photodiodes
- Current-sense/shunt amplifier front-ends
- Differential-to-single-ended sensor interfaces
- Active filters and equalizers
- ADC driver stages
- Audio/instrumentation signal conditioning

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar