MCF5249LAG120

Images are for reference only

MCF5249LAG120

IC MCU 32BIT ROMLESS 144LQFP

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Supplier Rochester Electronics, LLC
Package Bulk
Series MCF524x
ProductStatus Active
CoreProcessor Coldfire V2
CoreSize 32-Bit Single-Core
Speed 120MHz
Connectivity I²C, IDE, Memory Card, SPI, UART/USART
Peripherals DMA, I²S, POR, Serial Audio, WDT
NumberofI/O 34
ProgramMemoryType ROMless
RAMSize 96K x 8
Voltage-Supply(Vcc/Vdd) 3V ~ 3.6V
DataConverters A/D 4x12b
OscillatorType External
OperatingTemperature 0°C ~ 70°C (TA)
MountingType Surface Mount
Package/Case 144-LQFP

Overview

Description

The MCF5249LAG120 is a Freescale/NXP ColdFire 32‑bit microcontroller in the MCF5249 family. It uses a ColdFire V2 32‑bit RISC core and targets embedded control applications. The “LAG120” suffix indicates a leaded LQFP‑120 package.
Key points:
- Core: ColdFire V2 32‑bit CPU suitable for mid‑range embedded tasks.
- Peripherals: Ethernet MAC (10/100) for networking, multiple serial ports (UARTs), I2C, SPI, timers, PWM, and ADCs.
- Memory/IO: On‑chip options plus external memory interface for Flash/RAM; pin‑compatible I/O for diverse applications.
- Package: LQFP‑120 (120‑pin) family variant.
- Applications: Industrial automation, embedded control with networking/connectivity requirements.
For exact specifications (clock speed, memory sizes, pinout, electrical characteristics), consult the MCF5249 data sheet and user manual. Development resources include official Freescale/NXP documentation, application notes, and supported toolchains. If you want, I can pull out the precise features for a specific revision.

Features

Key features of the MCF5249LAG120 (Freescale/NXP ColdFire MCU, 120-pin LQFP) typically include:
- ColdFire 32-bit RISC CPU core (non-FPU), up to about 60 MHz operation
- 10/100 Mbps Ethernet MAC with DMA (external PHY interface via MII/RMII)
- Flexible memory: on-chip Flash and RAM, plus external memory interface (boot ROM options available)
- Peripherals: multiple serial interfaces (SCI), SPI, I2C
- Timers and PWM: several 16-bit timers with PWM outputs
- Analog peripherals: ADC (and DAC in some variants)
- DMA controller for efficient data transfers
- Real-time/Watchdog features: watchdog timer, interrupt controller
- Debug support: JTAG/BDM
- GPIO with extensive pin multiplexing
- Power management: low-power/idle modes and safe reset options
- Package and electrical: 120-pin LQFP, typically 3.3V operation, industrial temperature range
Note: exact on-chip memory sizes, number of peripherals, and clock speeds vary by device variant; consult the datasheet for precise specifications for the specific MCF5249LAG120 part.

Package

It comes in a 120-pin LQFP (Plastic Quad Flat Pack) package.

Pinout

- Pin count: 120 pins (LQFP-120, package code LAG120)
- Function: Freescale/NXP MCF5249LAG120 is a 32-bit ColdFire microcontroller (MCU) in an LQFP-120 package, providing CPU core plus integrated peripherals for embedded control (memory, timers, UARTs, SPI/I2C, etc.).

Manufacturer

Manufacturer: Freescale Semiconductor (formerly Motorola’s semiconductor division; now part of NXP Semiconductors).
What kind of company: A semiconductor company that designs and manufactures embedded processors and microcontrollers (e.g., ColdFire MCUs) for automotive, industrial, and consumer applications.

Application

Applications areas for MCF5249LAG120 (ColdFire MCU):
- Industrial automation and process control
- Automotive body electronics and gateways
- Networking/embedded Ethernet devices
- Motor control and robotics
- Instrumentation, data acquisition and test equipment
- Building automation and energy/metering systems
- Consumer electronics requiring real-time control
- Medical devices with deterministic performance

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar