MP1482DN-LF-Z

The MP1482DN-LF-Z is a step-down (buck) voltage regulator designed for efficient power management in various electronic applications. It operates with a wide input voltage range, typically from 4.5V to 28V, making it suitable for battery-powered devices and systems requiring stable output voltage. This regulator can deliver an adjustable output voltage, usually as low as 0.8V, with a maximum output current of 2A.
Key features include high efficiency, which helps in reducing heat generation, and a built-in compensation network, simplifying circuit design. The MP1482DN-LF-Z also incorporates protection mechanisms such as overcurrent protection, thermal shutdown, and under-voltage lockout, enhancing reliability in operation.
It supports various external components for optimization, including inductors and capacitors, allowing customization based on specific application requirements. Ideal applications include consumer electronics, automotive systems, and industrial equipment, where efficient power conversion and compact design are essential.

The MP1482DN-LF-Z is a high-efficiency, step-down (buck) voltage regulator designed for various applications. Key features include:
1. Input Voltage Range: Operates from 4.5V to 28V, making it suitable for a wide range of power sources.
2. Output Current: Capable of delivering up to 3A of output current, suitable for powering demanding loads.
3. Output Voltage: Adjustable output voltage from 0.8V to 20V, allowing flexibility for different applications.
4. High Efficiency: Offers high efficiency up to 95%, which helps reduce heat generation and improve performance.
5. Switching Frequency: Operates at a fixed frequency of 600kHz, enabling smaller inductors and capacitors.
6. Protection Features: Includes over-current protection, thermal shutdown, and under-voltage lockout for enhanced reliability.
7. Package Type: Available in a compact SOIC-8 package, facilitating easy integration into designs.
These features make the MP1482DN-LF-Z suitable for applications in consumer electronics, industrial devices, and portable equipment.

The MP1482DN-LF-Z is packaged in a 10-pin MSOP (Mini Small Outline Package) format.

The MP1482DN-LF-Z is a step-down (buck) voltage regulator with a total of 8 pins. Its primary functions include converting a higher input voltage to a lower output voltage, which is adjustable via external resistors. The pinout and their functions are as follows:
1. VIN: Input voltage supply.
2. GND: Ground reference.
3. SW: Switch node, connects to the inductor.
4. COMP: Compensation pin for loop stability.
5. FB: Feedback pin to set the output voltage.
6. EN: Enable pin to turn the regulator on or off.
7. PG: Power good indicator, indicates output voltage status.
8. NC: No connection, not used.
The MP1482DN-LF-Z is designed for high-efficiency applications and supports various output current capabilities, making it suitable for battery-powered devices and other power management solutions.

The MP1482DN-LF-Z is manufactured by Monolithic Power Systems, Inc. (MPS). MPS is a publicly traded company that specializes in high-performance analog and mixed-signal semiconductors. The company focuses on power management solutions, offering a wide range of products including DC-DC converters, LED drivers, and motor drivers, primarily used in consumer electronics, industrial applications, automotive systems, and telecommunications. Founded in 1997 and headquartered in San Jose, California, MPS is known for its innovative designs and commitment to delivering high efficiency and reliability in its power management ICs.

The MP1482DN-LF-Z is a step-down (buck) regulator used in various applications, including power management for portable devices, battery-powered systems, LED drivers, and consumer electronics. It efficiently converts higher input voltages to lower output voltages, making it suitable for telecommunications, automotive electronics, and industrial equipment. Its features include high efficiency, compact size, and thermal protection, enhancing performance in space-constrained designs.

The MP1482DN-LF-Z is a step-down (buck) voltage regulator. Equivalent products include the LM2596, TPS54331, and LTC3780, which also provide adjustable output voltages and similar current capabilities. Always verify specific parameters such as input voltage range, output current, and thermal characteristics to ensure compatibility in your application.