MT29F4T08EULGEM4-ITF:G

MT29F4T08EULGEM4-ITF:G is a Micron NAND Flash memory device (MT29F4T08 series). It is a 4‑gigabit (512 MB) planar MLC NAND with an 8‑bit data bus (x8). It uses Micron’s high‑speed Toggle/ONFI‑compatible interface and supports standard NAND functions such as page-program, block-erase, and multi‑plane operations with ECC support. The ITF suffix indicates packaging/temperature grade; exact electrical/timing specs, page size, spare area, and endurance are in the Micron datasheet. Suitable for embedded storage and firmware data retention in consumer and industrial applications.

Here are the key features of MT29F4T08EULGEM4-ITF:G (Micron NAND):
- Capacity: 4 Gb (≈512 MB) NAND flash
- Interface: x8 data bus; ONFI-compliant (2.x era); Toggle mode interface supported
- Technology: Multi-level cell (MLC) NAND flash
- Page/Block: typical 2 KB data page with a small spare area; large blocks for efficient wear management
- Organization: supports multi-plane/interleaved operations for higher throughput
- Temperature: Industrial grade (-40°C to 85°C)
- Voltages: typical Nand I/O and core voltages as per standard Micron 1.8V I/O family (with standard 2.7–3.6V supply options)
- Endurance/Retention: device-level wear-leveling and BPM; data retention rated for many years at 25°C; P/E endurance in the tens of thousands of cycles range (device spec)
- Reliability features: Bad Block Management, wear leveling; ECC support (host-side) and on-die/advanced error handling
- Power/performance: optimized for low power and fast random/sequential reads/writes; supports cache read/write and fast programming modes
- Packaging/qualification: industrial-grade parts with standard NAND packaging and RoHS-compliant
For exact electrical characteristics, timings, and endurance numbers, please refer to the official datasheet.

TSOP-48 (48-pin TSOP) package.

Pin count: 48 pins (FBGA-48).
Function: Micron MT29F4T08EULGEM4-ITF:G is a 4‑Gbit parallel NAND flash memory (x8 data bus) used for non-volatile storage, with standard NAND control signals (CLE, ALE, CE, WE, RE, WP, RB) and data/address pins, plus Vcc/GND.

- Manufacturer: Micron Technology, Inc.
- What kind of company: An American multinational semiconductor company and integrated device manufacturer (IDM) that designs, makes, and sells memory and storage products, including DRAM and NAND flash. Based in Boise, Idaho (founded 1978).

MT29F4T08EULGEM4-ITF:G is a 4 Gbit NAND flash memory. Typical applications: non-volatile storage for embedded systems and consumer electronics (phones/tablets, digital cameras, USB drives, memory cards, set-top boxes), automotive/industrial equipment (infotainment, dashboards, controllers), and boot/storage memory in SSDs and other small-form-factor devices for firmware/data logging.