MX25V1606FM2I03

Images are for reference only

MX25V1606FM2I03

IC FLASH 16MBIT SPI/DUAL 8SOP

  • Manufacturer
  • Mfr. Part #MX25V1606FM2I03
  • Package
  • Datasheet
  • In Stock5075

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Series MXSMIO™
Part Status Not For New Designs
Base Product Number MX25V1606
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 16Mbit
Memory Organization 2M x 8
Memory Interface SPI - Dual I/O
Clock Frequency 104 MHz
Write Cycle Time - Word, Page 75µs, 4ms
Voltage - Supply 2.3V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOP
Packaging Tube

Overview

Description

MX25V1606FM2I03 is Macronix’s 16‑Mbit serial NOR flash memory. It provides non-volatile storage for embedded systems and firmware, accessed via an SPI-compatible interface that supports standard, dual, and quad I/O modes for higher throughput. The device stores 16 Mbit (2 MB) of data and offers fast read, page program (256-byte page), and erase operations at sector/block levels. It includes typical protection features (write enable/disable, status register protection, block protection) plus deep power-down and wake-up support to reduce power. Operation is from a single supply (typical range around 1.8–3.6 V; check exact Vcc for this variant). It is suitable for boot memory, firmware storage, and data logging in microcontroller and embedded applications, with low-power modes for battery-powered designs. For precise voltage, timing, endurance, and command details, consult the MX25V1606FM2I03 datasheet.

Features

MX25V1606FM2I03 features (concise):
- 16 Mbit (2 MB) serial flash memory
- SPI interface with x1/x2/x4 data (standard, dual, and quad I/O modes)
- Page program: 256-byte page; random-access writes
- Read options: standard, fast reads; Quad IO read up to 104 MHz
- Erase granularity: 4 KB sectors, 32 KB blocks, 64 KB blocks, and full-chip erase
- Endurance and retention: typical ~100k P/E cycles; data retention > ~20 years
- Low-power operation with deep power-down mode
- Operating voltage: 2.7–3.6 V
- Industrial temperature range: −40°C to +85°C
- Hardware protection: WP# and HOLD# pins with sector/block protection options
(Refer to the datasheet for exact voltage/temperature specs and catalog variations.)

Package

MX25V1606FM2I03 uses an 8-pin SOIC (US8) small-outline package.

Pinout

- Pin count: 8 pins (SOP-8/8-pin package)
- Function: 16-Mbit serial SPI flash memory (MX25V1606FM2I03). Interface via CS, CLK, DI (SI), DO (SO); has power (VCC) and ground (GND) pins, plus control pins WP# (write protection) and HOLD# (hold). Useful for program/data storage with standard read/write/erase operations.

Manufacturer

- Manufacturer: Macronix International Corp., Ltd. (MXIC).
- Company type: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory products (NOR/NAND flash, ROM, etc.), i.e., an integrated device manufacturer (IDM) with its own fabrication facilities.

Application

Key application areas for MX25V1606FM2I03 (16 Mbit serial flash):
- Boot/firmware storage for microcontrollers and SoCs
- Code/data storage for embedded systems (IoT, wearables, consumer electronics)
- Firmware updates in automotive ECUs and industrial controllers
- Configuration and log storage in networking gear (routers, switches)
- External flash for set-top boxes, digital cameras, and audio/video devices
- General non-volatile storage for portable devices via SPI flash interface

Equivalent

Equivalent parts (16 Mbit, 3V SPI serial flash; similar interfaces):
- Winbond W25Q16JV / W25Q16DV
- GigaDevice GD25Q16C
- Cypress/Spansion S25FL016K
- ISSI IS25LP016D
Note: exact speed, packaging and dual/quad I/O support vary—confirm voltage, timing, and package in your BOM.

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar