NCV7240ADPR2G

Images are for reference only

NCV7240ADPR2G

IC PWR DRIVER N-CHAN 1:8 24SSOP

  • Manufacturer
  • Mfr. Part #NCV7240ADPR2G
  • Package 24-SSOP
  • Datasheet
  • In Stock5781

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Package Tape & Reel (TR),Cut Tape (CT)
Series Automotive, AEC-Q100
ProductStatus Obsolete
SwitchType General Purpose
NumberofOutputs 8
Ratio-Input:Output 1:8
OutputConfiguration Low Side
OutputType N-Channel
Interface SPI
Voltage-Load 3.3V, 5V
Current-Output(Max) 600mA
RdsOn(Typ) 1.5Ohm
FaultProtection Open Load Detect, Over Temperature
OperatingTemperature -40°C ~ 150°C (TJ)
MountingType Surface Mount
SupplierDevicePackage 24-SSOP

Overview

Description

NCV7240ADPR2G is an automotive-grade smart high-side switch (load switch) from ON Semiconductor. It provides protected, controlled power to a single load in 12/24V automotive environments, with built-in protections and diagnostics.
Key points:
- Single-channel high-side switch: IN controls OUT to the load.
- Protective features: current limiting, short-circuit/overcurrent protection, thermal shutdown, reverse polarity protection, and undervoltage/overvoltage protection.
- Diagnostics: fault/diagnostic status output to report fault conditions to a microcontroller.
- Packaging/variant: ADPR2G denotes a specific package/reel variant of the NCV7240 family.
Uses: simple, robust driving of automotive loads (lamps, motors, pumps) with minimal external components.
Note: Exact electrical specs (current limit, on-resistance, propagation delay, fault latencies) vary by variant. See the latest datasheet for precise figures and the recommended application circuits. Would you like a quick datasheet link or a comparison with similar NCV parts?

Package

8-pin SOIC (SOP-8) package; RoHS-compliant, reel code R2G.

Pinout

- Pin count: 8 pins (8-pin package such as SOIC-8/TSSOP-8).
- Function: Automotive LIN transceiver (physical layer) that interfaces a microcontroller to a LIN bus; provides bus driver/receiver, TXD/RXD interface to the controller, plus power, ground, wake/standby and protection features.

Manufacturer

- Manufacturer: NXP Semiconductors
- Company type: Dutch multinational semiconductor company that designs and manufactures integrated circuits for automotive, industrial, and consumer electronics.

Application

NCV7240ADPR2G is a LIN transceiver for automotive use. Typical application areas include:
- Automotive body electronics and control modules (doors, lighting, HVAC, seats, instrument clusters)
- Sensor/actuator networks and gateway nodes
- Any 12-V automotive LIN bus interface requiring robust data exchange with protections (ESD/short-circuit) and fail-safe behavior.

Equivalent

I can provide exact cross-references, but I need the device function and specs. NCV7240ADPR2G could be a high‑side switch, regulator, or transceiver; equivalents depend on voltage/current and package. Please share the datasheet or confirm the intended function and key ratings (voltage, current, etc.). I’ll list exact equivalents from TI, ST, NXP/Nexperia, Renesas, Infineon.

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer