OPB625

Images are for reference only

OPB625

SENSOR OPTICAL 4.83MM PCB MOUNT

  • Manufacturer
  • Mfr. Part #OPB625
  • Package
  • Datasheet
  • In Stock8382

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Series Photologic®
Part Status Active
Sensing Distance 0.190" (4.83mm)
Sensing Method Through-Beam
Output Configuration Pull-Up Resistor, Buffer
Mounting Type Through Hole
Current - Supply 12 mA
Voltage - Supply 4.5V ~ 16V
Response Time 30ns
Operating Temperature -40°C ~ 100°C
Package PCB Mount
Packaging Bulk

Overview

Description

OPB625 is an optocoupler (optoisolator) with an infrared LED input and a phototransistor output. It provides galvanic isolation between a low-voltage control side and a high-voltage/noisy side, letting a logic signal control a circuit without a shared ground. When the LED is driven, light activates the transistor, allowing current to flow on the output side.
Key points:
- Package: typically 4-pin DIP (variants exist). Pinout usually: pin 1 anode, pin 2 cathode, pin 3 emitter, pin 4 collector (verify in the datasheet).
- Isolation: several kilovolts RMS between input and output.
- CTR: current transfer ratio depends on LED current and temperature; specified in the datasheet.
- Speed: suitable for low- to moderate-speed signaling (tens to thousands of Hz, depending on variant).
Common uses: microcontroller or PLC signal isolation, SMPS control, sensing where galvanic isolation is needed.
For exact electrical specs (IF, CTR, VCE(sat), tPHL/tPLH) and packaging variants, consult the OPB625 datasheet.

Features

OPB625 is a phototransistor optocoupler (optoisolator). Key features (typical; variant-dependent):
- Isolation: ~5 kV RMS between input LED and output transistor
- CTR: roughly 50–300% at IF = 20 mA (up to 600% max, depending on variant and temperature)
- Input: Infrared LED, IF ≈ 20 mA, Vf ≈ 1.2 V
- Output: NPN phototransistor (max IC ~50 mA)
- Speed: standard (not high‑speed); t_r/t_f in the μs range
- Package: DIP‑4 or similar SMD variants
- Operating temp: typically −40 to +85 °C (industrial); wider on some versions
- Applications: galvanic isolation for logic/data signals, microcontroller interfacing, safety-critical isolation
Note: exact numbers (CTR, VCEO, speed) vary by variant (e.g., OPB625A/B). Check the specific datasheet for precise specs.

Package

OPB625 is a single-channel optocoupler packaged in a standard 4-pin DIP (through-hole) package.

Pinout

OPB625 is a 4‑pin DIP optocoupler (optical isolator). It has an input LED and a phototransistor output, providing isolation between input and output.
Pinout (typical):
- Pin 1: Anode
- Pin 2: Cathode
- Pin 3: Emitter
- Pin 4: Collector
The LED (pins 1–2) drives the phototransistor (pins 3–4) to transfer a signal across isolation.

Manufacturer

OPB625 is manufactured by OPTEK Technology. OPTEK is an optoelectronics company that designs and manufactures optocouplers, phototransistors, LEDs, and other optical/electrical components.

Application

OPB625 is a phototransistor-output optocoupler. Applications include galvanic isolation between low-voltage logic and high-voltage/noisy circuits; interfacing microcontrollers with power electronics; feedback and sensing in switching power supplies; driving relays/triacs and motor drivers; signal isolation in automation/PLC I/O and data communication interfaces; instrumentation and safety-critical equipment requiring isolation.

Equivalent

OPB625 is a phototransistor optocoupler. Common equivalents/substitutes with similar CTR and specs include: PC817, EL817, 4N25, 4N35, LTV-817, SFH618A, FOD817A. Ensure you match CTR, Vceo/isolation voltage, and package to your design from the datasheets.

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar