SN74HC126DR

Images are for reference only

SN74HC126DR

IC BUFFER NON-INVERT 6V 14SOIC

  • Manufacturer
  • Mfr. Part #SN74HC126DR
  • Package SOIC (D)-14
  • Datasheet
  • In Stock5357

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Package Tape & Reel (TR),Cut Tape (CT)
Series 74HC
ProductStatus Active
LogicType Buffer, Non-Inverting
NumberofElements 4
NumberofBitsperElement 1
OutputType 3-State
Current-OutputHighLow 7.8mA, 7.8mA
Voltage-Supply 2V ~ 6V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 14-SOIC (0.154, 3.90mm Width)

Overview

Description

The SN74HC126DR is a quad buffer/driver with three-state outputs from Texas Instruments, designed for high-speed applications. It features four independent non-inverting buffers capable of driving heavily loaded lines. The device is part of the 74HC family, which operates at high speed and offers low power consumption.
Key specifications include a supply voltage range of 2V to 6V, with a typical propagation delay of 10 ns at 5V. Each output can drive up to 15 mA at high drive conditions. The SN74HC126DR also supports TTL logic levels, making it compatible with various digital circuits.
The device features a three-state output, allowing multiple devices to share a common bus without interference. It is packaged in a Shrink Small Outline (SSOP) format, designated as "DR," suitable for surface mounting. Applications include bus-oriented systems, data communications, and general-purpose signal buffering.

Features

The SN74HC126DR is a quad buffer/driver with three-state outputs from Texas Instruments. Key features include:
1. Quad Buffers: Four independent buffers/driver circuits that can handle digital signals.
2. Three-State Outputs: Outputs can be in high, low, or high-impedance states, useful for bus-oriented applications.
3. High-Speed Operation: Capable of operating at a maximum frequency of 125 MHz at Vcc = 5 V.
4. Wide Supply Voltage Range: Compatible with supply voltages from 2 V to 6 V.
5. Low Power Consumption: Features low static and dynamic power consumption, suitable for battery-operated devices.
6. Input/Output Compatibility: Can interface with TTL and CMOS logic levels, enhancing design flexibility.
7. Temperature Range: Operates within a wide temperature range, typically -40°C to 125°C.
8. Packaging: Available in a 14-TSSOP package, facilitating compact designs.
These features make the SN74HC126DR suitable for applications in data routing, signal buffering, and interfacing in various electronic systems.

Package

The SN74HC126DR is packaged in a 14-pin SOIC (Small Outline Integrated Circuit) form factor. This surface-mount package is designed for compact applications and features a wide range of operating temperatures.

Pinout

The SN74HC126DR is a quad buffer/driver with three-state outputs and is part of the Texas Instruments 74HC series logic family. It features a 14-pin dual in-line package (DIP) configuration.
Pin Count: 14 pins
Functions:
- The device includes four independent buffers/drivers (A, B, C, D) for input signals.
- Each buffer has a three-state output (Y) that can be enabled or disabled via an output enable pin (OE).
- The function can be summarized as follows:
- Inputs (A1, A2, A3, A4) correspond to outputs (Y1, Y2, Y3, Y4).
- Outputs are enabled when the corresponding OE pin is low (active low).
- When OE is high, the outputs are in a high-impedance state.
Typical use cases include signal buffering and driving, as well as interfacing between different logic levels.

Manufacturer

The SN74HC126DR is manufactured by Texas Instruments (TI), a prominent American technology company. Founded in 1930, Texas Instruments specializes in semiconductors and various electronics, including integrated circuits (ICs). They are well-known for their innovation in analog and embedded processing, providing solutions for a wide range of applications in automotive, industrial, communications, and consumer electronics. TI is recognized for its commitment to research and development, offering a broad portfolio of products, including logic devices, amplifiers, microcontrollers, and more, catering to both consumer and industrial markets.

Application

The SN74HC126DR is a quad buffer/driver with three-state outputs, commonly used in digital circuits for signal buffering, level shifting, and driving capacitive loads. Its key applications include data communication, interfacing between microcontrollers and peripherals, bus driving, and signal conditioning in various electronic devices like computers, industrial automation, and consumer electronics.

Equivalent

The SN74HC126DR is a quad buffer/driver with 3-state outputs. Equivalent products include:
1. 74HC126 (various package options)
2. ST74HC126 (STMicroelectronics)
3. MC74HC126A (ON Semiconductor)
4. TC74HC126 (Toshiba)
Ensure to check specific datasheets for pin compatibility and electrical characteristics when substituting.

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar