SPC560P40L1CEFAR

Images are for reference only

SPC560P40L1CEFAR

IC MCU 32BIT 256KB FLASH 64LQFP

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Supplier STMicroelectronics
Package Tape & Reel (TR),Cut Tape (CT)
Series Automotive, AEC-Q100, SPC56
ProductStatus Active
CoreProcessor e200z0h
CoreSize 32-Bit Single-Core
Speed 64MHz
Connectivity CANbus, LINbus, SPI, UART/USART
Peripherals DMA, POR, PWM, WDT
NumberofI/O 37
ProgramMemorySize 256KB (256K x 8)
ProgramMemoryType FLASH
RAMSize 20K x 8
Voltage-Supply(Vcc/Vdd) 3V ~ 5.5V
DataConverters A/D 16x10b
OscillatorType Internal
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount
Package/Case 64-LQFP

Overview

Description

Introduction to SPC560P40L1CEFAR
- An automotive-grade 32-bit microcontroller from NXP Freescale, in the SPC560P/SPC56x family, built on the Power Architecture e200 core. Targets automotive ECUs (engine/powertrain, body/chassis).
- Core peripherals: on-chip flash and RAM; CAN (multiple channels), LIN, SCI, SPI, I2C; timers and PWM; ADCs/DAC; DMA; CRC; watchdog; memory protection for safer software.
- Packaging/temperature: CEFAR suffix denotes automotive-grade packaging with an extended temperature range for harsh vehicle environments.
- Typical use: control and monitoring in ECUs, sensor interfaces, actuators, motor control, safety-critical applications.
- For exact specifications (flash size, RAM, peripherals, pin count, clock speed, temperature range), consult the SPC560P40L1CEFAR datasheet and reference manual.

Features

SPC560P40L1CEFAR is an automotive 32-bit MCU from Freescale/NXP with the SPC560P family. Key features:
- CPU: 32-bit Power Architecture e200z0 core, up to about 40 MHz
- Memory: on-chip flash and RAM (size depends on variant)
- Peripherals: FlexCAN, SCI/UART, SPI, I2C
- Motor control and timing: multiple PWM/modules and advanced timers
- Analog: 12-bit ADCs (and DACs in some variants)
- DMA: eDMA for high-throughput data transfer
- Data security/math: CRC engine
- Reliability: watchdog timer, boot ROM; in-system programming
- Debug: on-chip debug interface (BDM/JTAG/SW-based)
- Power and safety: low-power modes and clock control features; automotive temperature range (AEC automotive-grade)
- Packaging: suitable LQFP/CFAR-type packages
Note: exact Flash/RAM sizes and peripheral counts vary by device revision within the SPC560P40L1CEFAR family.

Package

LQFP package — Low-Profile Quad Flat Pack, 144 pins.

Pinout

Pin count: 208 pins (LQFP208 package).
Function: 32‑bit automotive microcontroller (SPC560P family) based on the e200z0 core, intended for ECU/motor-control applications with integrated peripherals such as CAN/LIN, PWM, ADC, SCI/SPI/I2C, and flash/ RAM.

Manufacturer

- Manufacturer: NXP Semiconductors (formerly Freescale Semiconductor; Freescale was acquired by NXP).
- What kind of company: A multinational semiconductor company that designs and manufactures embedded processors, microcontrollers, and related semiconductor solutions for automotive, industrial, and consumer electronics.

Application

Applications of SPC560P40L1CEFAR include:
- Automotive electronics: engine/transmission ECUs, body/chassis controllers, instrument clusters, gateways.
- Electric motor control: BLDC/PMSM servo drives and motor controllers for automotive and industrial use.
- Industrial automation: control systems for pumps, fans, CNC/machine tools, robotics.
- General embedded automotive-grade applications that require a robust 32-bit MCU.

Equivalent

Equivalent products are other MCU parts in the SPC56xP family with the same memory/peripheral setup. Closest substitutes include MPC560P40L1 (same device in a different suffix) and, for similar performance with more features, MPC5604P or MPC5606B (subject to package/memory compatibility). For exact one-to-one equivalents, check NXP’s cross-reference tables or distributor databases (Digikey/Mouser) using the exact package/temperature code.

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar