TPS54232D

Images are for reference only

TPS54232D

IC REG BUCK ADJUSTABLE 2A 8SOIC

  • Manufacturer
  • Mfr. Part #TPS54232D
  • Package SOIC-8
  • Datasheet
  • In Stock6261

100% Original & New

24 Hours ready to ship

365 Days Warranty

RFQ & Get more Discounts

Specifications

Package Tube
Series Eco-Mode™
ProductStatus Active
Function Step-Down
OutputConfiguration Positive
Topology Buck
OutputType Adjustable
NumberofOutputs 1
Voltage-Input(Min) 3.5V
Voltage-Input(Max) 28V
Voltage-Output(Min/Fixed) 0.8V
Voltage-Output(Max) 25V
Current-Output 2A
Frequency-Switching 1MHz
SynchronousRectifier No
OperatingTemperature -40°C ~ 150°C (TJ)
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Overview

Description

TPS54232D is a Texas Instruments buck regulator (Simple Switcher). It combines the high‑side switch and control logic to efficiently convert a higher input voltage to a lower, stable output for powering logic and peripherals. Key features typically include an enable/soft‑start pin, external feedback for either fixed or adjustable output, and protection such as overcurrent, thermal shutdown, and short‑circuit protection. It requires external components (inductor, input and output capacitors, and a feedback network) and may use a diode or a synchronous rectifier depending on variant. The D suffix denotes a specific package/temperature variant for board and thermal characteristics. Common applications are automotive, industrial, and embedded systems needing a compact, efficient 3‑A class buck regulator (e.g., to generate 5 V, 3.3 V rails). For exact electrical specs (VIN range, VOUT options, switching frequency, pinout, and package details), consult the TPS54232D datasheet and TI product page.

Features

Here are the key features of the TPS54232D (typical for TI’s TPS54232 family):
- 3-A continuous output current buck regulator
- Wide input voltage range (suitable for automotive/industrial use)
- Fixed-output versions and/or adjustable output via external feedback network
- Integrated high-side switch and catch diode (minimal external parts)
- Fixed-frequency operation with enable pin for shutdown
- Soft-start to limit inrush
- Overcurrent/short-circuit protection with protection timing
- Overtemperature protection
- Undervoltage lockout (UVLO) for reliable startup
- High efficiency across load range
- Small package with minimal surrounding components (compact solution)
Note: exact output voltage options and pinout can vary by package/version; consult the datasheet for your specific TPS54232D variant.

Package

TPS54232D comes in an 8‑pin VSSOP (the D‑package family).

Pinout

Pin count: 8 pins.
Function: TPS54232D is a buck (step-down) switching regulator (SimpleSwitcher) with an integrated high-side switch and control circuitry. It converts a higher input voltage (typically 2.5–5.5 V) to a lower, programmable output using an external resistor network. Key pins include VIN, GND, SW (switch node to inductor), FB (feedback), and EN (enable/disable). It provides features such as soft-start, undervoltage lockout, overcurrent protection, and thermal shutdown.

Manufacturer

The TPS54232D is manufactured by Texas Instruments (TI). TI is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing integrated circuits for electronics.

Application

TPS54232D is a high‑efficiency 3-A buck regulator ideal for point‑of‑load (POL) power. Common applications include:
- Powering CPUs/GPUs, FPGAs, ASICs, and memory
- Telecom and networking equipment
- Automotive and industrial electronics
- Consumer and portable devices
- Distributed power rails in data centers and similar systems
(Used to generate low-voltage rails from higher input voltages.)

Equivalent

Would you like TI-only variants or cross‑references to other manufacturers? Please share the needed specs (Vin range, Vout, Iout, package) so I can give accurate equivalents.

Shipping

Shipping MethodsWe

offer global shipping services through DHL, FedEx, TNT, UPS, or any other forwarder of your choice.


Shipping Fee Reference (DHL/FedEx):

DHL: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 2-5 business days.

FedEx: Shipping cost ranges from $25-$40 (0.5kg), with an estimated delivery time of 3-7 business days.

UPS: Shipping cost ranges from $25-$45 (0.5kg), with an estimated delivery time of 3-7 business days.

TNT: Shipping cost ranges from $25-$65 (0.5kg), with an estimated delivery time of 3-7 business days.

EMS: Shipping cost ranges from $30-$50 (0.5kg), with an estimated delivery time of 7-15 business days.

Registered Air Mail: Shipping cost is $2-$4 (0.1kg), with an estimated delivery time of 5-20 business days.

Payments

Payment Methods

The Payment term is 100% Prepaid.

Currently, we only accept the below payment methods:

1. PayPal

2. Credit/ Debit Card

3. Wire Transfer

Similar